INTRAMA工业用自动点标机RSPN200D /气动轮胎点标系统
|
 |
最后更新：2012-07-31
关 注 度：2744
生产企业：青岛汇海进口记号笔
|
|
|
 与企业联系时请告知该信息来自教育装备网！ |
|
|
产品详细介绍INTRAMA工业用自动点标机RSPN200D /气动轮胎点标系统
INTRAMA工业用自动点标机RS.PN200.D Stylotube
工业用自动点标机RS.PN200.D。Automated dots marker RS.PN200.D Stylotube for industrial use.
该款PN.200是从包含RS.2000油漆盒的整体打标机上分离出的打标头。This version of this PN.200 has a marking head seperated from the main body, that contains the RS.2000 paint cartridge.
RS.PN.200D带分隔头，允许头部放置在任何位置和方向的，甚至倒挂。This marker RS.PN.200D with a sperated head allows to place the head in any position and direction, even upside down.
主体将保持在同一方向，填充墨盒头部朝下The main body will remain in the same direction, that the refill cartridge get its head down side.
这两个机构通过软管连接，确保油漆的流动，保持新鲜。The two bodies will be connected with a flexible tube, which allows the paint to flow properly and to remain fresh.
可以在如轮胎，电机，塑料件，木材等任何表面上打点标记You can then make some dots marks on any type of surfaces like tires, motors, plastic parts, wood etc...
标记的宽度为2mm、3mm（标准型）、6mm。Mark's width: 2, 3 (standard) and 6 mm
.需要配套使用RS2000填充墨盒（需另外配备）To be use with the refill cartridge RS.2000 (not include in the delivery)
要使用压缩空气系统：0.2bar最佳To be used with air pressure system: optimum with 0,2 bars.
.2个阀在休息的情况下允许停止流动。2 valves allow to stop the paint to flow in case of a break in the production cycle
净重：2.0kg。Weight per unit: 2.0 kg
|
|
| 会员级别：免费会员 |
| 加入时间：2012-07-31
|
|
|
在线客服
